Productum
SUS304/Teflon Coating End Cap
| Articulus No. | ID (mm) | OD (mm) | Supplementum Type | BC | Crassitudo (mm) |
| EC-0100 | 103 | 153 |
| 133 | 3.0 |
| EC-0150 | 153 | 203 |
| 183 | 3.0 |
| EC-0200 | 203 | 257 |
| 233 | 3.0 |
| EC-0250 | 253 | 307 |
| 283 | 3.0 |
| EC-0300 | 303 | 367 |
| 340 | 3.0 |
| EC-0350 | 353 | 417 |
| 388 | 3.0 |
| EC-0400 | 403 | 467 |
| 438 | 3.0 |
| EC-0450 | 453 | 517 |
| 490 | 3.0 |
| EC-0500 | 503 | 583 |
| 544 | 3.0 |
| EC-0550 | 553 | 633 |
| 594 | 3.0 |
| EC-0600 | 603 | 683 |
| 644 | 3.0 |
| EC-0650 | 653 | 733 |
| 694 | 3.0 |
| EC-0700 | 703 | 783 |
| 744 | 3.0 |
| EC-0750 | 753 | 833 | NO | 794 | 3.0 |
| EC-0800 | 803 | 883 | or | 844 | 3.0 |
| EC-0850 | 853 | 933 | transire | 894 | 3.0 |
| EC-0900 | 903 | 983 | Crucem iungite Bar | 944 | 3.0 |
| EC-0950 | 953 | 1033 | Duplex crucis+flange | 994 | 3.0 |
| EC-1000 | 1003 | 1083 |
| 1044 | 3.0 |
| EC-100 | 1103 | 1183 |
| 1144 | 3.0 |
| EC-1200 | 1203 | 1283 | AXT on | 1244 | 3.0 |
|
|
|
| 2 XC ross Tie Bar |
|
|
| EC-1300 | 1303 | 1383 |
| 1344 | 3.0 |
| EC-1400 | 1403 | 1483 | or | 1444 | 3.0 |
| EC-1500 | 1503 | 1583 | Duplex crucis+flange | 1544 | 3.0 |
| EC-1600 | 1604 | 1704 | Trellis | 1644 | 3.0 |
| EC-1700 | 1704 | 1804 | 2X2 Cross Tie Bar | 1744 | 3.0 |
| EC-1800 | 1804 | 1904 |
| 1844 | 3.0 |
| EC-1900 | 1904 | 2004 |
| 1944 | 3.0 |
| EC-2000 | 2005 | 2105 |
| 2044 | 3.0 |
Nota:
Ductus diameter super 2000mm est in petitione praesto.
Crassitudo ductus in SMACNA aedificatur "ductus industrialis circa signa constructionis** classes 1 et 5 in pressione --2500Pa (-10 in.wg). Et etiam mutari potest sicut postulatio emptoris.
1. Partes ductus aeris pingendi (inclusa superficiei flaminis intra fistulam) sandblasted esse debet, asperitas sandblatationis occurrere debet asperitati 3.0 G/S76, 40µm vel plurium, et particulae residua arena et pulvis metallicus extra. tibia ex sandblating removenda est.Confirma utrum superficies ductus workpiece sit mundus et officina aluminii ffoyle obtegitur.
2. Organa fistulae in cubiculum membranae excute, pingendi initium, imbre electrostatici pulveris machinam efficiens, et imbre gun tubo extenso, tempus sinteringium mediocriter secundum characteres rudium materiarum 15~20 minutarum compone, et amplitudo sitering temperatus est. 285°~300°C.
3. Finito workpiece, extra fistulam cum pittacio certificatione FM affixa est, QC Vide numerum et label specificationem productam.Os flangium obsignatum est cum lamina PE vel PP tabulae conruptae concavae, et taeniola fasciolis plasticis infixa.
4. Ducta diameter super 2000mm est in petitione praesto.Crassitudo meatum in SMACNA aedificatum est.Atque etiam mutari potest ut postulatio emptoris.
